Core Composition
High-density PU or MDFProfiles in high-density polyurethane or MDF, chosen room by room. PU is the right call for bathrooms and humid spaces.
Architectural Wall Finishes
Our high-density PU and MDF moldings will not crack, swell or rot in UAE humidity, and a typical living room is molded and painted in 24 to 48 hours. We cover homes and offices across Dubai and the Northern Emirates.
From AED 35 / linear meter fully installed
Engineered for the UAE Climate
The profiles, paints and adhesives behind a finish that stays crisp for years.
Profiles in high-density polyurethane or MDF, chosen room by room. PU is the right call for bathrooms and humid spaces.
Every profile is primed and painted with two coats of washable acrylic in matte, eggshell, satin or semi-gloss.
PU moldings do not absorb water, so they will not swell or crack in humid rooms. Our wallpapers are vinyl-coated and wipeable.
Low-VOC paints and solvent-free adhesives, so rooms can be used again within hours, not days.
Our Workflow
Careful layout first, so every frame lines up and every corner meets cleanly.
We check walls for level and mark out every panel so frames line up evenly around sockets and switches.
Cracks are filled and sanded, and profiles are cut with mitered corners to laser-aligned lines.
Moldings are fixed with adhesive and pins, then every joint is filled, caulked and sanded smooth.
Primer and two finish coats go on, protection comes up, and we vacuum and hand over your warranty certificate.
Start with step one, free of charge.
Book Free In-Home MeasurementCurated Palette
Paint cards, molding profiles and wallpaper books all travel in the van, so you can compare them on your own walls.
Transparent Rates
Three ways to buy, all quoted in writing. Whatever you choose, the figure you sign is the figure you pay.
Profiles and trim packs for your own decorator.
PU or MDF profiles cut to your plan
Corner and ceiling trims
Adhesive and fixings
Panel layout drawing
Molded, filled and painted by our team.
Wall repair, filling and sanding
Mitered frames fitted to layout
Primer plus two finish coats
Furniture protection and clean-up
Full-room detailing for villas and offices.
Crown molding and ceiling detail
Designer wallpaper inside frames
Full-room repaint included
Extended finish warranty
Written Quotes Only
Exact quotations provided in writing after laser measurement on-site.
Book Free In-Home MeasurementRecent Transformations
Full-height picture-frame molding painted in a soft satin white.
Evenly spaced frames along a long entrance hall, finished in eggshell.
Textured designer wallpaper set inside molded frames on a lounge wall.
Service FAQ
We fill cracks, sand rough patches and spot-prime repairs before any molding goes on. Heavily damaged plaster is noted on your quote, so there are no surprises.
Over tiles, yes, with a suitable adhesive. Wallpaper usually needs to come off first, because moldings glued to paper can lift with it. We check on the measurement visit.
Washable eggshell and satin finishes wipe clean, and PU moldings are unaffected by humidity. For hallways and children’s rooms we recommend satin for extra scuff resistance.
A typical living room is molded and painted in 24 to 48 hours. Paint needs a few hours between coats, so larger jobs run over two to three days.
Dust with a dry microfiber cloth and wipe marks with a damp cloth and mild soap. We leave you a labeled tin of leftover paint for touch-ups.
Question not covered here?
Ask a Master Fitter on WhatsAppFree Quote Before Any Work
Have your room dimensions? Send them on WhatsApp for a same-day ballpark, or call and speak to one of our master fitters about your space.