Core Composition
HMR board on stud frameMoisture-resistant HMR board or WPC over a timber or steel stud frame, fixed to carry the weight of a wall-mounted screen.
Custom Architectural Joinery
Moisture-resistant boards, fluted WPC and marble-effect cladding are built on a solid stud frame that holds up to daily use and UAE humidity, and most walls are installed in 24 to 48 hours. We design and fit them across Dubai and the Northern Emirates.
From AED 2,200 fully installed
Engineered for the UAE Climate
What goes behind and on top of every feature wall we build.
Moisture-resistant HMR board or WPC over a timber or steel stud frame, fixed to carry the weight of a wall-mounted screen.
Fluted WPC, marble-effect PVC and veneer panels finished with a UV coat that does not yellow in sunlight.
Mineral wool infill behind the panels deadens echo from speakers, and every joint is sealed against humidity.
Fire-retardant Class B1 panels, low-VOC adhesives, and ventilated space around LED drivers and AV equipment.
Our Workflow
Planned around where you sit, built so nothing needs chasing into the wall later.
We check the wall for level, locate pipes and cables with a detector, and set screen height from your seating position.
The stud frame goes up with conduits for power, HDMI and network, and panels are cut to laser-aligned lines.
Panels are anchored with hidden fixings, LED channels are set in, and matching edge trims finish every side.
We seal joints, test the lighting and every cable, vacuum up, and hand over your warranty certificate.
Start with step one, free of charge.
Book Free In-Home MeasurementCurated Palette
Panel offcuts and full-height louver samples travel in our van so you can hold them against your wall.
Transparent Rates
Three ways to buy, all quoted in writing. Whatever you choose, the figure you sign is the figure you pay.
Panels, louvers and trims for your own fitter.
Panels, louvers and trims cut to size
LED strip and driver kit
Fixings and adhesive
Layout drawing
Designed, built and finished by our team.
Design layout and measured drawing
Stud frame with concealed conduits
Cladding, LED lighting and trims fitted
Screen mounting and clean-up
Feature walls for villas, lobbies and showrooms.
Marble-effect or veneered feature panels
Floating console or shelving joinery
Acoustic infill across the full wall
Extended joinery warranty
Written Quotes Only
Exact quotations provided in writing after laser measurement on-site.
Book Free In-Home MeasurementRecent Transformations
Integrated TV unit with a floating console and every cable concealed in the frame.
Textured fluted wood-effect slats with warm LED backlighting along the top edge.
A recessed niche in matte cashmere with a hidden soundbar shelf.
Service FAQ
We check level, locate existing cables and pipes, and confirm the wall can take fixings. Block walls take anchors directly; drywall gets extra supports in the stud frame. Any extra work is written into your quote.
Yes. Because the cladding sits on its own frame, it can go over tiles, wallpaper or textured paint without stripping them first.
The panels are moisture-resistant and wipe clean, cables are fully enclosed, and we can mount the screen out of reach. Fluted WPC resists scratches better than painted MDF.
Most walls are installed in 24 to 48 hours once the design is approved. Walls with custom joinery or marble-effect panels can take three to four days.
Dust fluted panels with a soft brush attachment and wipe marks with a damp microfiber cloth. Avoid solvent cleaners on lacquered surfaces. The LED strips need no maintenance.
Question not covered here?
Ask a Master Fitter on WhatsAppFree Quote Before Any Work
Have your room dimensions? Send them on WhatsApp for a same-day ballpark, or call and speak to one of our master fitters about your space.